Zeiss AxioCam MRc5 Manual de servicio Pagina 26
- Pagina / 80
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installation of the AxioCam MRc5
18 B 48-0028 e 10.2003
Mounting the camera onto the microscope
To mount the camera onto your microscope’s TV port, use a 1.0x or a 0.63x
C-mount adapter.
Suitable adapters (example):
Port 44 Port 60
1.0 x No. 452995 (44 C2/3" 1.0x) No. 456105 (60 C2/3" 1.0x)
0.63 x No. 452997 (44 C2/3" 0.63x) No. 1069-414 (60 C2/3" 0.63x)
For the Axiovert 25 please use adapter 451268.
The adapters are not supplied with the camera.
To mount the camera onto the microscope, remove the dust cap from the
camera’s C-mount port. Screw the adapter in as far as it will go. Then mount
the camera onto the microscope’s TV port. Please ensure that no dust enters
the opening on the camera.
Never touch the surface of the infrared barrier filter or CCD sensor
with your fingers. If you remove the camera from the microscope,
make sure you immediately cover the C-mount opening with the
dust cap provided, to prevent dust getting in.
Function indicator
After you have switched on the PC or the FireWire hub, the LED on the
camera lights up in red for a short time, before changing to green. If the LED
goes out instead of turning green, this indicates that the camera’s firmware is
not functioning correctly. In this case please consult the notes in the section
"Resetting the AxioCam MRc5 firmware".
As a rule, if the LED is green, this indicates that power is being properly
supplied to the AxioCam MRc5 via the data cable.
During continuous image acquisition, the color of the LED switches between
red (exposure) and green (ready).
- AxioCam MRc5 1
- 27.10.2003 4
- Table of Contents 5
- IMPORTANT NOTE 8
- 2 B 48-0028 e 10.2003 10
- 4 B 48-0028 e 10.2003 12
- Camera, data cable 14
- 8 B 48-0028 e 10.2003 16
- 10 B 48-0028 e 10.2003 18
- 12 B 48-0028 e 10.2003 20
- 14 B 48-0028 e 10.2003 22
- 16 B 48-0028 e 10.2003 24
- Function indicator 26
- Second FireWire socket 27
- Expansion socket 27
- 20 B 48-0028 e 10.2003 28
- 22 B 48-0028 e 10.2003 30
- 24 B 48-0028 e 10.2003 32
- 26 B 48-0028 e 10.2003 34
- 28 B 48-0028 e 10.2003 36
- 30 B 48-0028 e 10.2003 38
- 32 B 48-0028 e 10.2003 40
- 34 B 48-0028 e 10.2003 42
- 36 B 48-0028 e 10.2003 44
- 38 B 48-0028 e 10.2003 46
- 40 B 48-0028 e 10.2003 48
- 42 B 48-0028 e 10.2003 50
- Automatic exposure 52
- Color adjustment 54
- 48 B 48-0028 e 10.2003 56
- Acquisition modes 57
- 50 B 48-0028 e 10.2003 58
- Binning 59
- Resulting file size 59
- 52 B 48-0028 e 10.2003 60
- 54 B 48-0028 e 10.2003 62
- 56 B 48-0028 e 10.2003 64
- 58 B 48-0028 e 10.2003 66
- 60 B 48-0028 e 10.2003 68
- 62 B 48-0028 e 10.2003 70
- 64 B 48-0028 e 10.2003 72
- 3 Trouble Shooting 73
- Trouble Shooting 74
- 66 B 48-0028 e 10.2003 74
- 4 Technical Data 75
- 4.2 Spectral Sensitivity 77
- II B 48-0028 e 10.2003 79
Polycom SoundPoint 3726-17369-001 manuels
Manuels d'utilisation et guides de l'utilisateur pour Téléphones Polycom SoundPoint 3726-17369-001.
Nous fournissons des manuels en pdf 1 Polycom SoundPoint 3726-17369-001 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentarios a estos manuales