Zeiss Axiolab A Manual de instrucciones descargar pdf (Pagina 22)

Carl Zeiss Axiolab A

1-12 06/99 B 40-015 e

1.4

Function Elements

(see Fig. 1-5, after this table)

Item Designation Purpose/description

1 Stand Module base of the Axiolab A microscope

2 6 V, 30 W reflected-light

halogen illuminator

Reflected-light illuminator with 6 V, 30 W halogen lamp

3 Reflected-light illuminator H Carrier element for the binocular tube and the illuminator; also used to

accommodate various technique sliders

4 Camera port Enables (after removal of the dust cap) the connection of various

adapters for attachment of photomicrography/videomicroscopy

equipment (35 mm cameras, video cameras)

5 Binocular tube Binocular viewing tube permanently attached to the reflected-light

illuminator H; can be set to the user's individual interpupillary distance;

after removal of the dust caps, dia. 30 mm eyepieces - one of which is

adjustable (foc) - can be inserted.

6, 7 Eyepiece, right and left Fixed and adjustable (foc) eyepiece; the fixed eyepiece must be

assigned to the less myopic eye; two focusing eyepieces are required if

reticles or photo reticles are used.

8 Dust protection slider

(2 pcs.)

These two dust protection sliders should always remain in the

Axiolab A microscope; technique sliders can also be inserted only if

transmitted-light equipment is available

9 Objective nosepiece Carrier for the maximum of 5 objectives which are swung into the

beam path manually

10 Specimen stage, fixed

Stage area: 160

140 mm; for the maximum specimen height of

- 20 mm (stage attached at upper stop) or

- 45 mm (stage attached at lower stop)

Two spring clips (supplied) enable specimens attached to a 26

76 mm

slide to be held in position (also see item 31)

11 Coaxial coarse and fine drive, L Permits the specimen stage to be lifted and lowered within a travel

range of approx. 20 mm (also see section 1. 6 (7));

used for specimen focusing; mechanical unit together with item 29

12 Connecting cable for 6 V

30 W reflected-light illuminator

Must be connected to the sockets at the instrument rear to allow

operation of the reflected-light illuminator

13 ”A/D” illumination converter Permits the switchover between incident light and transmitted-light

when instruments with an additional transmitted-light equipment are

used.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Comentarios a estos manuales

Sin comentarios

Zeiss Axiolab A Manual de instrucciones Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Microscopios Zeiss Axiolab A