Zeiss LSM 510 Manual de usuario descargar pdf (Pagina 6)

4. Find the specimen

(Axioplan 2)

The light path select,

focus knob

and stage

are manual controls. The rest of the microscope

is controlled by the software.

To set up the Axiovert microscope to locate your

specimen first move the light path selector to

VIS.

Move the correct objective in to place.

Do not use air-objectives after an

immersion objective without wiping the

immersion liquid (water or oil) from the

specimen and objective.

Brightfield, halogen light can be switched on and off HAL button

on the body of the microscope.

The intensity of brightfield light is most easily adjusted with the

Intensity control knob on the body of the microscope

Arc lamp light can be shuttered on and off by either the FL button

on the body of the microscope on the right hand-side.

The fluorescence filter block carousel can be switched back

and forward using the two buttons on the body of the microscope,

underneath the left hand focus

knob.

Once you have found your specimen, pull the light path

selector out to the LSM position. The microscope will

automatically change the filter-position and shutter the light

sources. If you fail to do this you will receive an error when you

try to acquire a confocal image.

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Sin comentarios

Zeiss LSM 510 Manual de usuario Pagina 6