Zeiss KF 2 ICS Especificaciones descargar pdf (Pagina 30)

Start-up

Carl Zeiss Attaching tube Axiostar plus

2-8 B 40-815 e 12/01

1Dust cap

2 Binocular tube

3 Binocular phototube

4 Hexagonal screw

5 Knurled screw

6 Threaded hole for knurled or hexagonal screw

Fig. 2-4 Attaching binocular tube / phototube 45°

2.3 Attaching tubes

One knurled screw and one hexagonal screw

each are supplied with the mount. Any of these

screws can be used to clamp the tube

(phototube) to the stand.

• Screw the required screw into the threaded

hole (2-4/6) in the stand.

2.3.1 Attaching binocular tube 45°/20 ICS

• Remove dust cover (2-4/1) from tube

underside. Unscrew the knurled screw

(2-4/5) or the hexagonal screw (2-4/4) from

the stand.

• Press the binocular tube (2-4/2) in a slightly

inclined position to the right into the spring

of the stand.

• Then set the tube in the dovetail of the

stand by lowering the left side. The tube is

now secured from falling out.

• Turn the tube to the desired observation

position; both the illustrated rotation and

the 180° backward rotation are possible.

• Tighten the knurled screw (2-4/5) or the

hexagonal screw (2-4/4).

2.3.2 Attaching binocular phototube

45°/20

ICS

• Remove dust caps (2-4/1); loosen knurled

screw (2-4/5) or hexagonal screw (2-4/4).

• Attach the binocular phototube (2-4/3) to

the stand mount in the same way as the

binocular tube.

• Tighten knurled screw (2-4/5) or hexagonal

screw (2-4/4).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Comentarios a estos manuales

Sin comentarios