Zeiss KF 2 ICS Especificaciones descargar pdf (Pagina 37)

Start-Up

Axiostar plus Attaching condensers Carl Zeiss

B 40-815 e 12/01 2-15

2.8.3 Attaching Abbe condenser with

5-position turret

Attachment is made in the same way as the

Abbe condenser 0.9/1.25.

• Loosen both centering screws (2-14/3) on

the condenser carrier (2-14/1).

• Press condenser with dovetail against the

spring pin (2-14/2) in the condenser carrier.

Make sure that the orientation screw

(2-14/5) on the condenser engages in the

groove (2-14/4) of the condenser carrier.

• Tighten both centering screws (2-14/3) on

the condenser carrier (2-14/1) until they

engage in the dovetail and hold the

condenser (2-14/7) in position.

1 Condenser carrier

2 Spring pin

3 Centering screws

4 Groove

5 Orientation screw

6 Aperture diaphragm lever

7 Condenser

Fig. 2-14 Attaching Abbe condenser with 5-position

turret

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 99 100

Sin comentarios

Zeiss KF 2 ICS Especificaciones Pagina 37