Zeiss KF 2 ICS Especificaciones descargar pdf (Pagina 81)

100

Operation

Axiostar plus Attaching adapters for digital compact cameras Carl Zeiss

B 40-815 e 12/01 3-25

• Zoom camera lens from wide-angle

position (W) through to tele position (T).

• Perform test until image is format-filling

without trimming or vignetting.

• Tighten the set screw (3-15/3) again.

No untrimmed image may be obtained when a

camera adapter combination is used which is

not recommended by Carl Zeiss.

3.11.2 Digital cameras with 52 mm

filter thread,

e.g. SONY DSC–S70, DSC-S75,

DSC-S85

When delivered, the sliding (3-16/4), the

threaded adapter ring M37/M52 (3-16/3) and

the lens mount (3-16/6) are premounted. The

drawing on the right shows the disassembled

status.

Furthermore, the threaded ring adapter

M37/52 (3-16/3) can be unscrewed from the

sliding mount (3-16/4) (not shown), i.e.

cameras with M37 can also be attached as

described in the previous chapter.

• Screw SONY VAD-S70 adapter ring

(3-16/2) into the objective/filter thread of

the DSC-S70 camera (3-16/1) until stop.

• Plug connector 60 (3-16/8) onto the

binocular phototube (3-16/9) and tighten

the 3 set screws (3-16/10).

• Screw the unit, consisting of sliding mount

(3-16/4), the threaded adapter ring

M37/M52 (3-16/3) and the lens mount

(3-16/6) into the SONY VAD-S70 adapter

ring (3-16/2).

• With the lens mount (3-16/6) pointing

forward, plug the unit onto connector 60

(3-16/8) until stop and tighten the set

screw (3-16/7).

1 SONY DSC-S70 camera

2 SONY VAD-S70 adapter ring

3 M37/M52 threaded adapter ring

4 Sliding mount

5 Set screw

6 Lens mount

7 Set screw

8 Connector 60 for microscope camera

9 Binocular phototube

10 Set screw

Fig. 3-16 Attaching Sony "Digital Still Camera DSC-

S70"

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 99 100

Comentarios a estos manuales

Sin comentarios

Zeiss KF 2 ICS Especificaciones Pagina 81

Comentarios a estos manuales

Relacionado con productos y manuales para Microscopios Zeiss KF 2 ICS