Zeiss KF 2 ICS Especificaciones descargar pdf (Pagina 32)

Start-up

Carl Zeiss Screwing in objectives, Inserting eyepieces Axiostar plus

2-10 B 40-815 e 12/01

2.4 Screwing in objectives

• Remove dust caps (2-6/2) according to the

number of objectives and screw objectives

(2-6/3) into nosepiece (2-6/1) clockwise one

by one, starting with the lowest

magnification.

☞

Place dust caps on the unused objective

openings in the nosepiece.

1 4- or 5-position nosepiece

2Dust cap

3Objective

Fig. 2-6 Screwing in objectives

1 Focusing eyepiece

2 Fixed eyepiece

3 Binocular tube

4 Dust caps

Fig. 2-7 Inserting eyepieces

2.5 Inserting eyepieces

• Remove both protection caps (2-7/4) from

the binocular tube (2-7/3).

• Insert the fixed eyepiece, e. g. PL 10×/18 Br.

(2-7/2), into the right tube and the

focusing eyepiece PL 10×/18 Br. foc. (2-7/1)

into the left tube.

☞

The focusing eyepiece is used to compensate

for ametropia of the eyes.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 99 100

Sin comentarios

Zeiss KF 2 ICS Especificaciones Pagina 32