Zeiss Axiolab A Especificaciones descargar pdf (Pagina 57)

START-UP

Axio Lab.A1 Installing standard components Carl Zeiss

04/2013 430037-7144-001 57

3.1.9 Attaching condenser

x Move the stage carrier with focusing drive to

the higher stop position.

CAUTION

The objectives should not collide with

other parts.

x Swivel out front lens (if shiftable) on condenser

using lever (Fig. 3-15/7).

x Remove both centering screws (Fig. 3-15/5) on

the condenser carrier until their ends are no

longer visible.

x Push the condenser carrier (Fig. 3-15/3) with

drive knob for vertical adjustment (Fig. 3-15/2)

down as far as it will go.

If using an overview fixture, make sure that this

does not come to rest on the luminous-field

diaphragm.

x Insert the condenser (Fig. 3-15/8 or 9) between the condenser carrier (Fig. 3-15/3) and the stage

carrier (Fig. 3-15/1). In doing so, align the screwed stud bolt on the underside of the condenser with

the groove (Fig. 3-15/6).

x Press the condenser with the dovetail ring against the mainspring (Fig. 3-15/4) of the condenser carrier

until the condenser sits horizontally on the condenser carrier.

x Position the condenser on the carrier so that the screwed stud bolt sits against the groove (Fig. 3-15/6)

at the front.

x Insert the centering screws until they engage with the dovetail ring of the condenser.

For mounting other types of condensers, proceed analogously.

Fig. 3-15 Attaching condenser

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 117 118

Sin comentarios

Zeiss Axiolab A Especificaciones Pagina 57