Zeiss Axiolab A Especificaciones descargar pdf (Pagina 65)

START-UP

Axio Lab.A1 Connecting to the power supply Carl Zeiss

04/2013 430037-7144-001 65

3.3 Connecting to the power supply

In all stand models the power supply of the

Axio Lab.A1 is located in the rear side of the

instrument.

x Connect microscope (Fig. 3-29/1) to the mains

power supply via a power cord and mains

socket.

x The Axio Lab.A1 can be connected to a line

voltage of 100 to 240 VAC, 50/60 Hz. The

power unit is set automatically to the line

voltage available.

3.4 Switching the microscope on/off

x Switch the microscope on/off using (Fig. 3-30/1)

the mains switch.

x Adjust image brightness (Fig. 3-31/3) using the

brightness control.

To do this, take hold of the recessed grips of

the rotary knob with the fingertips and turn it

to the desired position.

Only transmitted light and reflected light

fluorescence stand:

x Turn the FL/TL toggle switch (Fig. 3-31/1) to the

desired position (FL = fluorescence lighting for

reflected light; TL = lighting for transmitted

light).

x Depending on the position of the FL/TL toggle

switch, the image brightness is adjusted using

the controller for transmitted light TL

(Fig. 3-31/3) or for reflected light fluorescence

FL (Fig. 3-31/2).

Fig. 3-29 Mains power supply on rear side of

stand

Fig. 3-30 Mains switch on left side of

microscope

Fig. 3-31 Light intensity control and

FL/TL toggle switch

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 117 118

Sin comentarios

Zeiss Axiolab A Especificaciones Pagina 65